How to use angle grinder.- Yongkang Hufeng Industry & Trade Co.,Ltd.

How to use angle grinder.

When using an angle grinder (also called an angle grinder or grinder), you need to pay attention to the following steps:

1. Preparation: Make sure the work area is clean and prepare required safety equipment, such as goggles, protective gloves and masks.

2. Install the grinding head: Select a suitable grinding head, install it on the threaded spindle of the angle grinder, and use a wrench to fix it.

3. Plug in: Plug the angle grinder into AC power and make sure the power switch is in the off position.

4. Adjust the angle: According to the work needs, use the angle grinder's adjustment device to adjust the angle of the grinding head to obtain the required cutting or grinding direction.

5. Wear safety equipment: Wear safety equipment such as goggles, protective gloves and masks to ensure your own safety.

6. Start the angle grinder: Press the power switch to start the angle grinder. Before starting, make sure there are no people or other obstructions around the work area.

7. To operate: Gently touch the grinding head to the object that needs to be ground, cut or polished. Maintain a stable arm position and avoid excessive pressure while performing the procedure.

8. End the operation: After completing the work, turn off the power switch of the angle grinder and wait for the grinding head to stop rotating before placing it aside.

9. Maintenance and cleaning: Clean the dust, waste and oil stains on the angle grinder and grinding head promptly. Regularly check the grinding head for wear and replace it to ensure it is working properly.

The above are the basic steps and precautions for using an angle grinder. Please be sure to read and follow the instructions and safety guidelines before use. At the same time, according to the specific work requirements, you need to remember to choose the appropriate grinding head and appropriate angle.